SAVVY CONTROL PANELS

 

The SAVVY 1 pump motor status monitor and controller panel is designed for use with your HP -115 VAC or 1 HP 230 VAC single phase GAS MASTRRR series 32 submersible mixers. The SAVVY 1 panel is Nema 4X rated with a non-metallic FRP enclosure for indoor/outdoor service. Components include a UL Listed motor monitor with LED display, contactor, Nema 4X rated run, off and alarm status lamps, HOA switch, mechanical run time hour meter, and lightning surge arrester. UL Listed motor monitor includes high/low voltage trips, overcurrent/undercurrent trips, rapid cycling protection, and includes programmable time delay restarts. The motor monitor provides reliable instantaneous protection against low voltage conditions and trips the motor if overcurrent or undercurrent set-points are exceeded. The LED display supplies realtime data on motor amperage, voltage, and pending or current fault conditions.

 

The SAVVY 3 pump motor status monitor and controller panel is designed for use with all three phase GAS MASTRRR series submersible units and INTRUDRRR series inline mixers. The SAVVY 3 panel is Nema 4X rated with a 316 stainless steel enclosure for indoor/outdoor service. Components include a fused disconnect switch, CPT, motor monitor with display, combination starter with adjustable amperage trip heaters, run, off and alarm status lamps, HOA switch, mechanical run time hour meter, and lightning surge arrester. Motor monitoring features include high/low voltage, voltage/current unbalance, phase loss or reversal, overcurrent/ undercurrent amperage trips, rapid cycling, and include programmable time delay restarts. The motor monitor provides temperature sensor monitoring in submersible Franklin Electric motors 3 HP an above. The display keypad supplies realtime data on motor amperage, voltage, % unbalance and data-logging of fault conditions..

 

The SAVVY 4 pump motor status monitor and controller panel is designed for use with all three phase GAS MASTRRR series submersible units and INTRUDRRR series inline mixers. The SAVVY 4 panel is Nema 4X rated with a non-metallic FRP enclosure for indoor/outdoor service. Components include a fused disconnect switch, CPT, motor monitor with display, combination starter with adjustable amperage trip heaters, run, off and alarm status lamps, HOA switch, mechanical run time hour meter, and lightning surge arrester. Motor monitoring features include high/low voltage, voltage/current unbalance, phase loss or reversal, overcurrent/ undercurrent amperage trips, rapid cycling, and include programmable time delay restarts. The motor monitor provides temperature sensor monitoring in submersible Franklin Electric motors 3 HP an above. The display keypad supplies realtime data on motor amperage, voltage, % unbalance and data-logging of fault conditions.

 

The SAVVY 5 VFD control panel is designed for use with all three phase GAS MASTRRR series submersible units and INTRUDRRR series inline mixers where variable mixing intensity is desired. The SAVVY 5 panel is Nema 4X rated with a non-metallic FRP enclosure (316 stainless steel optional) for indoor/outdoor service. Components include a fused disconnect switch, CPT, VFD controller, run, off and alarm status lamps, HOA switch, mechanical run time hour meter, and lightning surge arrester. Optional PT100/SOLO provides temperature sensor monitoring in submersible Franklin Electric motors.

 

(Product Data Sheets in PDF: SAVVY 1, SAVVY 3, SAVVY 4, SAVVY 5 )

 


Products | PDF Downloads | Contact | Home